Difference between revisions of "Matlab Basics"

From Sutherland_wiki
Jump to: navigation, search
m (→‎Basic Operations)
(→‎M-Files)
Line 196: Line 196:
  
 
== M-Files ==
 
== M-Files ==
−
{{Stub|section}}
 
  
−
An M-file is a series of MATLAB commands that you save in a file.  Then you can re-run them easily and make changes without re-entering everything again.  Anything that can be done in the command window can also be done from an m-file.   
+
An M-file is a series of MATLAB commands that you save in a file.  Then you can re-run them easily and make changes without re-entering everything again.  Anything that can be done in the command window can also be done from an m-file.  As an example, let's reconsider the [[#Defining_Variables|projectile example]] discussed earlier.  We had the following MATLAB commands that we entered in the command window:
 +
<source lang="matlab">
 +
  y0 = 0.0;    % initial height (feet)
 +
  v0 = 300;    % initial velocity (feet/s)
 +
  vt = 0.0;    % final velocity (feet/s)
 +
  a  = -32.2;  % gravitational acceleration (feet^2/s)
 +
  t  = (vt-v0)/a;            % time (s) when the bullet stops (maximum height)
 +
  yt = y0 + v0*t + a*t^2/2;  % maximum height (feet).
 +
</source>
 +
 
 +
Suppose that we wanted to change the initial velocity.  We could re-enter everything again, ''or'' we could save these commands in a m-file.  To use an m-file, follow these steps:
 +
# Choose <tt>File&rarr;New&rarr;M-File</tt>.
 +
# Enter the MATLAB commands just as you would in the command window and save the file.  You may save it wherever you wish.
 +
# Navigate to the directory where you saved the file.  Do this one of two ways:  [[image:matlabCmdWindow_arrows.jpg|right]]
 +
#* Type the directory in the location box in the top of the MATLAB command window (the current directory).
 +
#* Select the button to navigate to the directory where your m-file is saved.
 +
# Now you can type the name of your m-file in the command window to run it.  For example, if I named the file <tt>projectile.m</tt>, I would type <source lang="matlab">projectile</source> at the command prompt.  MATLAB will then execute all of the statements in the m-file as if you had entered them into the command window (although they will not be shown in the command window).
 +
 
 +
Step 3 may be ommitted if the directory is already set in [[#MATLAB's_Path|MATLAB's path]], as discussed in the following section.
 +
<br clear="all" />
 +
 
  
 
=== MATLAB's Path ===
 
=== MATLAB's Path ===
−
{{Stub|section}}
+
 
 +
When you type a command in the MATLAB command window, MATLAB decides what to do based on the following:
 +
# Look to see if a variable by that name exists.  If so, use it.
 +
# If no variables match, then MATLAB starts looking for m-files that match the command name.  It does this by looking in its '''path'''.
 +
If no variables and no m-files match the command, then MATLAB issues an error message.
 +
 
 +
[[image:matlabPathDialogue.jpg|right]] 
 +
; path : A list of directories that MATLAB looks in to find m-files.
 +
 
 +
To set MATLAB's path, go to <tt>File&rarr;Set Path</tt>.  You will see an image similar to the one at the right.  Choose the <tt>Add Folder</tt> button and navigate to a folder containing m-files that you want to add to MATLAB's path.  Then click <tt>Save</tt>.  Now you don't have to have MATLAB running in the same directory where you saved your m-file.
 +
 
 +
<br clear="all" />

Revision as of 11:24, 19 August 2008

The Command Window

MATLAB's command window can be used as a very powerful calculator. The >> indicates that MATLAB is ready to accept a command. It works much like your calculator. For example, 

 >> 1 + cos(pi/2)
 ans = 
      1
 >> 5^2   % square 5
 ans =
      25

Note that anything following a % on a line is ignored. This allows us to include comments in our calculations.

Defining Variables

By using variables instead of numbers, our calculations look much like they would on paper. For example, from physics we know that projectile motion (in the absence of air resistance) is governed by the equations

\begin{align} y(t) &= y(0) + v(0) \, t + \tfrac{1}{2} a \, t^2, \\ v(t) &= v(0) + a\,t, \end{align}

where y(0) and v(0) are the position and velocity of the projectile at time t=0 and a is the acceleration.

Assume that we have the following problem: 

 A bullet is shot upward with an initial velocity of 300 feet per second (fps).  Determine the maximum height of the bullet.

The maximum height occurs when v(t)=0. We can solve the equation for v(t) to find

t=\frac{v(t)-v(0)}{a}.

This gives the time at which the bullet reaches its maximum height. We can then use the equation for y(t) to determine how high it is at that time.

Let's solve this in MATLAB. First we define the initial height, the initial velocity, and the acceleration. We also know the final velocity - it is zero. 

  y0 = 0.0;    % initial height (feet)
  v0 = 300;    % initial velocity (feet/s)
  vt = 0.0;    % final velocity (feet/s)
  a  = -32.2;  % gravitational acceleration (feet^2/s)

Now we can define the time that the projectile reaches its maximum height, and then determine what the maximum height is. We use the variables we just defined: 

  t  = (vt-v0)/a;            % time (s) when the bullet stops (maximum height)
  yt = y0 + v0*t + a*t^2/2;  % maximum height (feet).

If we omit the ; on the line for yt MATLAB will print its value. Or we can simply type the variable and MATLAB will print it. Doing this we see that the projectile reaches a height of 1,397.5 feet at 9.317 seconds (neglecting air resistance). This illustrates the convenience of using variables. The MATLAB code reads much like our original equations did.

Useful Commands

Often we want to see what variables we have defined in the MATLAB workspace. Or we may want to clear a variable. The commands in the following table illustrate several useful tools for managing variables.

Command Description Example (try these out)
who Lists variables currently defined in MATLAB. 
a = 5; b = 6; c = linspace(0,50,10);
who
whos Similar to who, but gives additional information. 
a = 5; b = 6; c = linspace(0,50,10);
whos
clear Clear all variables defined. 
a = 5; b = 6; c = linspace(0,50,10);
clear;            % clears all variables
who;              % displays nothing - no variables defined.
a=2; b=5; c=a+b;
clear a b;        % only clears a and b.  c is still here.
who;              % tells us that c is defined.
clc Clears the MATLAB workspace. Doesn't clear variables 
clc
save saves variables to a file that can be loaded later. 
clear;
a=5; b=6; c=a+b*2;
save myVariables;  % saves all variables to the file "myVariables.mat"
save bcVars b c;   % saves b and c only to "bcVars.mat"
load loads variables from a file 
clear;
a=5; b=6; c=a+b*2;
save myVariables;
save bcVars b c;
clear;
load bcVars;       % b and c are now defined.
who;
clear;
load myVariables;  % a b and c are all defined.
who;
help provides help on how to use a command 
help clear;
help load;
help save;

Basic Operations

In the projectile example above we saw examples of using several basic operators in MATLAB. The following table summarizes the basic operators and gives simple examples of their usage.

Basic Operators
Operator Description Examples
+ Addition 
1 + 2            % displays 3
b = 1+2;         % assigns 3 to the variable b.
a = cos(pi)+2.0; % a=1
- Subtraction 
1 - 2               % displays -1
b = 1-2;            % assigns -1 to the variable b.
a = sqrt(-4*b)+2.0; % a=4
* Multiplication 
2.2*3.3       % displays 6.6
a = 2.2*3.3;  % assigns 6.6 to a.
b = (pi/4);   % assigns sqrt(2)/2 to b.
/ Division 
6.6/2.2       % dispays 3.3
a = 6.6/2.2;  % assigns 3.3 to a.
b = sqrt(a/pi)*exp(a);
^ Power 
2^3                 % displays 8
a = 2^3 + 243^0.2;  % assigns 11 to a.
( ) Parentheses 
a = (2+5)*3;  % assigns 21 to a
b = 2+5*3;    % assigns 17 to b
c = 2*(a-10); % assigns 22 to c

NOTE: if you are using arrays, then the / and * operators have different behavior! See the page on array arithmetic for more information.


In addition, MATLAB has many built-in functions. Type help elfun at the MATLAB command prompt for a list. Some commonly used functions are given here:

Function Description
cos The cosine function
sin The sine function
tan The tangent function
sqrt The square-root, \sqrt(x)=x^{1/2}
exp The exponential function
log10 The base-10 log function, \log(10^x)=x
log The natural log function, \ln(\exp(x))=x
abs The absolute value, \left|x\right|

M-Files

An M-file is a series of MATLAB commands that you save in a file. Then you can re-run them easily and make changes without re-entering everything again. Anything that can be done in the command window can also be done from an m-file. As an example, let's reconsider the projectile example discussed earlier. We had the following MATLAB commands that we entered in the command window: 

  y0 = 0.0;    % initial height (feet)
  v0 = 300;    % initial velocity (feet/s)
  vt = 0.0;    % final velocity (feet/s)
  a  = -32.2;  % gravitational acceleration (feet^2/s)
  t  = (vt-v0)/a;            % time (s) when the bullet stops (maximum height)
  yt = y0 + v0*t + a*t^2/2;  % maximum height (feet).

Suppose that we wanted to change the initial velocity. We could re-enter everything again, or we could save these commands in a m-file. To use an m-file, follow these steps:

  1. Choose File→New→M-File.
  2. Enter the MATLAB commands just as you would in the command window and save the file. You may save it wherever you wish.
  3. Navigate to the directory where you saved the file. Do this one of two ways:
    Error creating thumbnail: Unable to save thumbnail to destination
    • Type the directory in the location box in the top of the MATLAB command window (the current directory).
    • Select the button to navigate to the directory where your m-file is saved.
  4. Now you can type the name of your m-file in the command window to run it. For example, if I named the file projectile.m, I would type 
    projectile
    at the command prompt. MATLAB will then execute all of the statements in the m-file as if you had entered them into the command window (although they will not be shown in the command window).

Step 3 may be ommitted if the directory is already set in MATLAB's path, as discussed in the following section.


MATLAB's Path

When you type a command in the MATLAB command window, MATLAB decides what to do based on the following:

  1. Look to see if a variable by that name exists. If so, use it.
  2. If no variables match, then MATLAB starts looking for m-files that match the command name. It does this by looking in its path.

If no variables and no m-files match the command, then MATLAB issues an error message.

Error creating thumbnail: Unable to save thumbnail to destination
path 
A list of directories that MATLAB looks in to find m-files.

To set MATLAB's path, go to File→Set Path. You will see an image similar to the one at the right. Choose the Add Folder button and navigate to a folder containing m-files that you want to add to MATLAB's path. Then click Save. Now you don't have to have MATLAB running in the same directory where you saved your m-file.


Retrieved from "https://sutherland.che.utah.edu/wiki/index.php?title=Matlab_Basics&oldid=127"